提高油田集输系统可靠性的研究

应用现代可靠性理论,从设计、工艺、技术等方面对油田集输系统进行了可靠性探讨,提出了增强系统可靠性的措施。     

塔河油田S105井-S106井-S117井井区盐下奥陶系油气成藏条件分析

为了探索塔河油田石炭系盐下奥陶系储集层发育特征及成藏条件,实现新地区、新层位、新领域的突破,进一步扩大塔河油田外围盐下奥陶系含油气范围,实现增储上产,利用率先在盐下奥陶系完钻的S105井、S106井、S117井的地质录井、测井、测试等资料,结合区域地质资料,对S105井-S106井-S117井区内盐下奥陶系的区域构造特征、油源条件、储集条件、储盖组合、圈闭条件及油气藏类型进行了分析,得出的结论是盐下奥陶系恰尔巴克组-一间房组发育地层不整合-岩溶裂缝型圈闭,且油源充足,储集层发育,圈闭条件良好,易于油气成藏,指出了盐下奥陶系的勘探开发前景。     

美国高能激光技术2005年主要进展

高能激光武器技术在2005年取得了重大进展。介绍了机载兆瓦级化学氧碘激光器的关键试验和束控-火控系统的飞行试验。评论和讨论了高功率固体激光器、光纤激光器、超高效率二极管源和中继镜技术的重大进展。     

Some results on generalized residual entropy

Shannon’s entropy plays an important role in the context of information theory. Since this entropy is not applicable to a system which has survived for some units of time, the concept of residual entropy has been developed in the literature. Here we generalize the residual entropy by choosing a convex function ? with ?(1) = 0. In this paper, some orderings and aging properties have been defined in terms of the generalized residual entropy function and their properties have been studied. Quite a few results available in the literature have been generalized and some distributions (viz. uniform, exponential, Pareto, power series, finite range) have been characterized through the generalized residual entropy.     

水轮机调速器现代调节技术及选型

对目前比较先进的微机调速器的两种系统结构进行了分析，并对微机调节的控制策略和调节参数的设置及系统配置等作了介绍，并提出了对凋速器技术性能的评价标准和调速器选型时的突出问题，可为实际应用提供参考。     

潜油螺杆泵采油系统设计与应用技术分析

潜油螺杆泵采油技术在某些方面具有其他人工举升技术不可比拟的优点，特别适合于我国渤海湾一带粘油区、海上平台的采油作业，但这项技术在我国实际开发应用的时间还比较短，人们对这项技术的了解还不够深入，很多单项技术还有待于更多的人去关注和研究.介绍了潜油螺杆泵采油系统的结构，总结了该项采油技术与其他常用采油技术相比较的特点，系统地阐述了国内外的发展状况，分析了以往投入生产试运行时系统失效的原因并提出了相应的解决办法，最后探讨了系统设计技术的发展趋势.     

建筑节能发展缓慢的原因及其对策

我国实施建筑节能已近10年，但仍然只停留在试点、示范的层面上，尚未扩大到整体．分析了造成建筑节能发展缓慢的原因，并提出了推行和普及建筑节能的对策．     

Final Drying of Whole Milk Powder in Vibrated-Fluidized Beds

Vibro-fluidized beds are widely used in drying sticky powders and agglomerated materials as milk powder. Using a vibro-fluidized laboratory scale dryer, this work is aiming at analyzing preliminarily the effect of its operational variables on the drying kinetics and characteristics of whole milk powder. The full-factorial design technique with three replications at the central point has been employed to generate data and correlations to quantify the effect of inlet air temperature, air flow rate, and vibration bed amplitude on the drying curves and the milk powder properties related to its faster reconstitution in water (as tapped density, Hausner cohesion ratio, agglomerate size distribution, and internal pore concentration). Results obtained are analyzed and discussed to identify the adequate operation condition for final drying whole milk powder in vibro-fluidized beds, assuring a high product quality.     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry     

基于Multisim7.0软件平台的电子电路设计型实验研究

介绍了EDA(电子设计自动化)技术中Multisim7.0软件平台的功能特点.利用EDA技术进行设计性实验的研究与开发,是改革传统电子电路实验教学模式的有效途径,能帮助学生掌握最先进的电子电路设计方法和技能.结合EDA技术在电子电路设计型实验中的应用实例分析,阐明了利用Multisim7.0软件平台进行电子电路设计的优越性,其方便的更改电路和元器件参数的能力,使得能够更快更好地进行电子电路设计与仿真分析,同时缩短设计电路的时间,因而是一种全新的培养学生实际动手能力的有效工具.